Brand Name : HXE
Model Number : 24DWT
Certification : ISO/SGS
Place of Origin : China(Mainland)
MOQ : 1 set
Price : Negotiable
Payment Terms : T/T, L/C
Supply Ability : 30 sets per year
Delivery Time : 45-60 work days
Packaging Details : Packed with plastic film, U-steel under the machine. 20GP container
Usage : Drawing and annealing
Inlet diameter : 0.8mm-1.6mm
Outlet diameter : 0.1mm-0.6mm
Max line speed : 1500m/min
Main motor : AC 3 Phase 22KW
Annealer motor : AC 3 Phase 3.7KW
Take up motor : AC 3 Phase 3.7KW
Product name : Non standard wire drawing machine
HXE-24DWT Copper fine wire drawing machine with annealer
HXE-24DWT Copper fine wire drawing machine with annealer is used to draw and anneal single bare copper wire from 0.8mm-1.6mm to 0.1mm-0.6mm.
I. Components
Name | Quantity |
1. Pay-off stands | 1 set |
2. HXE-24DWT main drawing machine | 1 set |
3. Electrical cabinet | 1 set |
4. Steam generator | 1 set |
5. Lubrication tank and Pump | 1 set |
6. Bobbin Loading&Unloading trolley | 1 set |
7. Spare part for one year | 1 set |
8. Others |
II. Main Technical parameters
1. Usage: Copper wire drawing and annealing. Inlet diameter: 0.8mm-1.6mm. Outlet diameter: 0.1mm-0.6mm. Max. mechanical speed: 2000m/min, capacity say 0.2mm, 1400m/min, 23kg per hour. Dies: 24 dies.
2. Slip ratio: 15%, Finished capstan slip ratio: 8%. Main motor: AC 3 Phase 22KW, Inverter control Annealer motor: AC 3 Phase 3.7KW, Inverter control. Take up motor: AC 3 Phase 3.7KW, Inverter control
Take up capacity: 50kg for diameter 300mm iron spool (Customize)
3. Spool size: Diameter 300mm/Max (Customize) Capstans: Ceramic plasma, Drawing capstan 316mm, Final capstan 268mm. Capstan lubrication: Water pipe spray. Traversing: 110W synchronous motor,transmission by timing belts.
4. Brake: 20KG-M Electromagnetic brake. Air pressure: 4-6kg/cm2. Annealing pulley: Diameter 120mm
Annealing volt: DC55V, Annealing current: DC600A , Annealing motor power: 33KVA
5. Tension control: Annealer & Spooler Tension control by Swing arms, Air pressure auto adjust.
Machine dimension(L*W*H): 3500mm*1600mm*2500mm, Machine weight:3200kg. Power source: 415V, 50Hz(Customized)
III. Machine structure
Annealing method is DC Three section annealing, there are three contact capstans, as Pre-Heating, Annealing and Drying. For drawing machine part, there is belts that connection from the Fix-speed
capstan to the Annealer machine to achieve the transmission, as keep same speed. Connect the Up capstan and Down capstan with Positive and Negative power, to make the wire in a short circuit, to achieve the heating.
There is annealing plate to auto track and adjust the speed and annealing voltage.To achieve fast coolant to make the wire soft(Annealing), the Down capstan is immersed into the coolant water(There is a water tank in the bottom of the Annealer machine), coolant water is 0.5% emulsion.
With the Pump to pump the coolant water through all pipes and valves, half sealed annealing door. Adjust the valves to adjust the coolant water in certain height.
To make sure the wire no oxidation, in the annealing protection pipe has steam (Buyer self will prepare Steam generator).
In the drying section, has a blowing device (Require two Tungsten dies, Buyer self prepare), by compressed air (Buyer self prepare Air compressor) to blow the water on the surface of the wire.
Lubrication oil concentration of mix with water 2-3%.
IV. Advantage and after-sale service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). DC. three-section annealing
(4). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Small 24DWT High Speed Wire Drawing Machine 1500m/min Air Pressure Auto Adjust Images |